>
MŨI KIM CƯƠNG DENTEX >
HÌNH TRÒN >
DiamondBur XF104 (801/014-001/014) hình tròn vừa
Products - Diamond Instruments
TYPES OF SHANKS SIZE OF DIAMOND GRIT
FG Standard Medium -withoutmark FG Short Super Coarse(SC) -●black ring RA‧CA‧W Coarse(C) -●green ring HP‧PM‧H Fine(F)
-●red ring Extra Fine(XF) -●yellow ring
APPLICATION‧Cavity preparation
‧Crown & Bridge preparations
‧Final monifications of composite restorations
‧Trimming and contouring on the following dental materials :
ceramics,precious metals,nonprecious metals,model cast alloys,acrylics,etc.
SAFETY RECOMMENDATION1.Be sure that the bur is inserted fully and tightly into the handpiece.
2.Select a suitable speed according to the Recommended Speed Table.
3.Never exceed maximum speed.
4.The recommeded work pressure is 0.3-2 N (30-200p) for FG type.
The recommeded work pressure is 2-5 N (200-500p) for HP type.
5.Avoid strong contact pressure and leverage.
6.Always use spray cooling (minimum 50 ml/min)
RECOMMENDED SPEED TABLE(FG TYPE)min(R.P.M)
Size
ISO 1/10 mm Speed range Maximum 008 - 011
012 - 016
017 - 020
021 - 023
024 - 027
028 - 031
032 - 040
041 - 055 75,000 - 150,000
55,000 - 110,000
40,000 - 85,000
35,000 - 75,000
30,000 - 60,000
25,000 - 55,000
20,000 - 45,000
17,000 - 35,000 450,000
300,000
90,000
NUMBER CODING1.Order No. - prefer to use DENTEX DENTAL number system, in order to prepare orders
efficiently by computer.
2.Reference No. - refer to common use codes of European brands.
3.ISO No. - accord to ISO 6360 Number Coding System, and apply to the abbreviated
form:
Example: 001/008 = Shape No./Diameter (1/10 mm)Ý kiến người dùng
Ý kiến người dùng